Debarker Operator Stationary Plant & Machine Operators

Steps in the processing of wood for the manufacturing of wooden articles and types of machines used for these processes such as drying, shaping, assembling and surface finishing.

Recommended Books

1 book

Woodworking

Vicenç Gilbert, Frederic…

2023

The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.

Different ways of cutting wood, across the grain or parallel with it, and radial or tangential to the core. The behaviour of cuts of wood under different circumstances and the …

Adjust cut sizes and depths of cutting tools. Adjust heights of worktables and machine-arms.

Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.

Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.

Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the …

Identify operating problems, decide what to do about it and report accordingly.

Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.

Check and safely operate machines and equipment required for your work according to manuals and instructions.

Select logs from storage and coordinate their transportation. Keep up with schedules and production requirements.

Move debarked logs from the conveyor belt to pushcarts into further inspection areas.

Inspect and observe logs passing on conveyor to detect completeness of the debarking process.

Set up and monitor the machine that strips remaining bark from timber or logs before they can be further processed, for example chipped for pulp production.

The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.

Various sawing techniques for using manual as well as electric saws.

Recommended Books

1 book

The Sawyer's Companion;

Sandford E Parsons, Luze…

2023

Key features, advantages and limitations of the different timbers and timber based products sold at a company and where to access this information.

Recommended Books

1 book

Timbers and Their Uses; a Handbook for Woodworkers, Merchants, and All Interested in the Conversion and Use of Timber

Wren Winn

2025

Types of cutting blades used in the sawing process, such as band saw blades, crosscut blades, plytooth blades and others, made from tool steel, carbide, diamond or other materials.

Check the quality of basic materials used for the production of semi-finished and finished goods by assessing some of its characteristics and, if needed, select samples to be analysed.

Perform cleaning routines after equipment use.

Check machinery and equipment to ensure reliable performance during use and operations in worksites.

Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.

Perform safety audits and inspections on workplaces and workplace equipment. Ensure that they meet safety regulations and identify hazards and risks.

Check machine equipment for proper performance and detect faults and malfunctions. Diagnose malfunctions using testing equipment to determine the required repair.

Maintain records of the progress of the work including time, defects, malfunctions, etc.

Meet contract specifications, schedules and manufacturers' information. Check that the work can be carried out in the estimated and allocated time.

Operate various machinery and equipment to cut wood in different sizes and shapes.

Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.

Prepare a comprehensive and unbiased report on wood technology production and progressive development of wood based materials.

Keep records of the machine's faults, interventions and irregularities for quality control.

Identify dull edges to sharp tools, or any defect in the edge. Use appropriate equipment to safely and effectively sharpen the tool. Maintain and protect sharpened tools. Report irreparable faults …

Evaluate the quality of the felled timber.

Measure the amount of timber felled using appropriate equipment. Take care of the equipment. Record the measured data.

De-limb trees ensuring that the quality is within specified limits.

Identify the main types of timber to be received at your company. Stack and store timber safely and in compliance with company procedures.

Identify the main types of timber based products to be received at your company. Stack and store timber based products safely and in compliance with company procedures.

Inspect timber sale sites and reforestation activities for compliance with permits and regulations.

Carry out tree inspections and surveys.

Inspect the stock to find out how much is left. Identify any damaged, faulty, or out of date items and move them to the appropriate location. Follow stock rotation methods …

Monitor the performance of heavy-duty equipment. Record troubleshooting, ensure that all operations comply with safety and health requirements.

Use hand-fed machinery for timber processing. Saw with a mobile saw bench, mechanically process firewood, split stakes, and use pointing machines, peelers and wood chippers.