Fibreglass Machine Operator Stationary Plant & Machine Operators

Have knowledge of various types of coating, providing a workpiece with one or more finishing layers of resins, sugars, powders, inactive and insoluable fillers, waxes, gums, plasticisers, colouring materials, lacquer, …

Process of applying multiple layers of fiberglass, a strong lightweight plastic reinforced with glass fibre woven into mats, using various techniques such as applying pressure or adhesives, welding or heating …

Recommended Books

1 book

Fiberglass Science and Technology

Hong Li

2021

Preview

Read and interpret such technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical …

Remove finished products from moulds and examine them in detail for anomalies.

Feed hoppers with the required materials using various tools such as lifting equipment or shovels.

Continuously check up on the automated machine's set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in …

Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.

Optimise and maintain the parameters of the production process such as flow, temperature or pressure.

Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.

Identify operating problems, decide what to do about it and report accordingly.

Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.

Control and adjust the parameters to maintain the appropriate pressure, temperature and flow rate of the molten fibreglass through the spray jets.

Feed the machine with raw fibreglass according to specifications of the end-products to be developed.

Verify that the overall conditions of the room where the process will take place, such as temperature or air humidity, meet the requirements, and adjust if necessary.

Use brushes and rollers to eliminate air bubbles that could weaken the fibreglass, to ensure perfect adherence of the resin to the product shell or to previous layers, and to …

Tend the machine used to create fibreglass products such as lawn furniture or boat hulls by spraying molten glassfibre.

Trim surplus material of fabric such as fiberglass mats, cloth, plastics or rubber.

The properties of different materials developped in a laboratory, their usage per type of products, and how to create them.

Recommended Books

1 book

Handbook of Composite Materials

Nicholas Thomson

2022

Polymerisation is a chemical process which has as output the creation of polymers or polymeric compounds by combining smaller molecules called monomers.

Recommended Books

1 book

Reversible Deactivation Radical Polymerization

Nikhil K. Singha, Jimmy …

2020

Preview

The manufacturing of items used in the daily life, personal use or daily practice. These products include protective safety equipment, drawing equipment, stamps, umbrellas, cigarette lighters, baskets, candles, and many …

The manufacture of products and equipment used for both outdoor and indoor sports activities, such as balls, rackets, ski's, surfboards, fishing, hunting, skating or fitness centre equipment.

The process of heating hydrocarbons, forming and combining polymers to create plastic resins which are used to make different kinds of products.

Apply a layer of protective solutions such as permethrine to protect the product from damage such as corrosion, fire or parasites, using a spray gun or paintbrush.

Perform cleaning routines after equipment use.

Clean the mould using water, grease or oil, washing and scraping them by hand.

Finish the product by sanding, branding and polishing the plastic surface.

Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.

Maintain records of the progress of the work including time, defects, malfunctions, etc.

Regularly inspect and perform all required activities to maintain the equipment in functional order prior or after its use.

Clean and repair moulds, e.g. by smoothening out imperfections on the surface.

Manage or dispose of significant amounts of waste materials or hazardous materials. Ensure required licenses and permits are in place and reasonable management practices, industry standards, or commonly accepted farming …

Measure the raw materials prior to their loading in the mixer or in machines, ensuring they conform with the specifications.

Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its …

Maintain required company records and forms in order to report any defective materials or questionable conditions of manufacturing machinery and equipment.

Use specific non-destructive testing methods and equipment that do not cause any damage to the product, such as X-rays, ultrasonic testing, magnetic particle inspection, industrial CT scanning and others, in …

Control remotely the flow of production from the start-up operations to the shutdown of the equipments and systems, using the control panel.

Form the moulding mixture adding specified amounts of materials, such as sand, clay, silica mud or plastic pellets, according to a fixed recipe, set up the controller of the melting …

Operate a gun which cuts the incoming fiberglass strands to the desired lenghts, propels the pieces into the catalyzed resin when it comes out of the gun, and sprays the …

Prevent the casting sticking to the moulds by brushing the mould with oil, hot wax or graphite solution, according to the specification of each casting component.

Inspect fiberglass laminated structures such as boat hulls and decks for deterioration or defects, and perform repair work accordingly.