Rubber Dipping Machine Operator Stationary Plant & Machine Operators

Types of protective materials and equipment foreseen for various types of tasks such as general or specialised cleaning activities.

The various types of tanks used for coating and dipping processes, such as hydro dipping tank, paint dip tank, and others.

The set-up and different parts of a dip-coating machine, or dip tank, such as the tank made from noncombustible material, drain board, steel supports, rack and pinion, cylinder lifting, and …

Collect samples of materials or products for laboratory analysis.

Mix chemical substances safely according to recipe, using the proper dosages.

Optimise and maintain the parameters of the production process such as flow, temperature or pressure.

Make use of protection equipment according to training, instruction and manuals. Inspect the equipment and use it consistently.

Weigh materials and products, record weight and other relevant data on tags or labels.

Analyse the already weighted samples of latex in order to check if the specified parameters, such as density, are according to the formula.

Dump the content into vat filled with water in order to avoid explosion when the heat accumulation is too high.

Fill the vat with the necessary ingredients for acid neutralisation starting with warm water and steam of air and finishing with soda ash.

Mix the specified compounds together with latex by using the agitators.

Operate the pump which transfers latex into mixing tanks, making sure the density of the obtained latex is according to specification.

Process latex mixtures using control panels in order to obtain rubber products such as foam rubber sheets, balloons or finger cots.

Tend a manufacturing machine designed to coat workpiece surfaces by applying dip-coating machine processes, monitor and operate it according to regulations.

Tip the liquid latex from drums to cans and to the machine holding tanks.

Instruments and methods used to separate, identify and quanitfy matter - the chemical components of natural and artificial materials and solutions.

Recommended Books

1 book

TEXT BOOK OF MODERN PHARMACEUTICAL ANALYTICAL TECHNIQUES

Dr. Amit Semwal, Dr. Ren…

2025

Preview

The national and international regulations with regards to the use and manufacture of electrical equipment on the workfloor. These regulations provide rules and guidelines on topics such as general risk …

Theoretical and practical applications of the science studying the action of displacements and forces on physical bodies to the development of machinery and mechanical devices.

Variety of batch tanks such as vertical batch tanks, cone bottom batch tanks, cone bottom batch tanks, and batch tank lids and their correct operation according to requirements.

Perform cleaning routines after equipment use.

Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.

Regularly inspect and perform all required activities to maintain the equipment in functional order prior or after its use.

Manage or dispose of significant amounts of waste materials or hazardous materials. Ensure required licenses and permits are in place and reasonable management practices, industry standards, or commonly accepted farming …

Measure the raw materials prior to their loading in the mixer or in machines, ensuring they conform with the specifications.

Check the impact of manufacturing machinery on the environment, analysing temperature levels, water quality and air pollution.

Write reports on the manufactured batches history taking into account the raw data, tests performed and compliance to GMP of each batch of product.

Adjust the oven temperature level and uniformity by correcting the fuel feed.

Manipulate the shape, properties and size of raw rubber material.

Measure the viscosity of the mixed ingredients by using a viscosimeter.

Use air-conveyor chutes to transfer products or mixtures from containers to storage tanks.

Load and unload materials from containers, manually or using appropriate tools. Load hoppers, containers, or conveyors to feed machines with products, using tools such as forklifts, transfer augers, suction gates, …

Operate and monitor the equipment used to move bulk material, such as blended granules, from one place to another.

Test the alkalinity of the caustic soda, adding soda or water as required.